• NEWLY DESIGNED MACHINE STRUCTURE

      MZ-MD series adopt five-support crankshaft structure to provide high stability and high precision. Two pillar guider design makes the injection fast, stable and precise. Redesigned high rigidity base and integrated pipeline design enhance machine stability. Also, MZ-MD series utilize embedded electric box design to save precious space for customers. All MZ-MD series have big tie bar space and clamping stroke to fit variety of product. Standardized T-slot is for installing and removing the molds much more conveniently. Double core-pulling is also standardized for different production requirements.

       
    • HIGH ENERGY SAVING

      MZ-MD high energy-saving injection molding machines consume no extra energy due to output volume changes according to load alteration. In the phase of holding pressure, servo motor lowers rotate speed and consumes a little of energies. In the phase of cooling, motor doesn’t work and consumes no energy. According to different products, MZ-MD high energy-saving injection machines will save up to 80% energy and bring you prominent economic benefit.

       
    • BETTER MOLDING STABILITY

      MZ-MD high energy-saving injection molding machines are equipped with rotary encoder and pressure sensor, and both of them have feedback of flow and pressure. Through changing the speed and torque, high quality synchronous servo motor makes corresponding flow and pressure adjustments to reach the effects of close-loop precision control.

       
    • QUICK RESPONSE

      It only costs 0.05s for MZ-MD high energy-saving injection molding machines to achieve the maximum output. In comparison with conventional hydraulic injection molding machines, their response speed have been obviously quickened and cycle time effectively shortened to improve production efficiency.

       
SPECIFICATION
MZ80MD MZ100MD MZ130MD MZ160MD MZ170MD MZ200MD
ITEM A B C A B C A B C A B C A B C A B C
INJECTION  UNIT
SCREW  DIAMETER mm 30 35 40 30 35 40 36 40 45 40 45 50 40 45 50 42 47 52
SCREW  L/D  RATIO L/D 22 18.9 16.5 25.7 22 19.3 24.4 22 19.6 24.8 22 19.8 24.8 22 19.8 24.6 22 19.9
SHOT  VOLUME(THEORETICAL) 88 120 157 106 144 188 206 254 321 276 350 432 276 350 432 333 416 510
INJECTION  WEIGHT(PS) g 81 111 145 98 133 173 189 234 296 254 322 397 254 322 397 306 383 469
INJECTION  PRESSURE Mpa 200 146 112 264 194 148 248 201 159 238 188 152 238 188 152 215 172 140
INJECTION  RATE g/sec 81 110 143 61 83 109 79 98 124 119 150 185 119 150 185 131 164 201
SCREW  SPEED rpm 290 235 245 240 240 240
CLAMPING UNIT
CLAMP  TONNAGE KN 800 1000 1300 1600 1700 2000
TOGGLE  STROKE mm 270 340 365 430 430 470
MIN.MOLD  HEIGHT mm 120 150 150 150 150 180
MAX.MOLD  HEIGHT mm 350 400 450 520 520 530
SPACE  BETWEEN  TIE  BARS mm 320X310 370X350 420X385 465X430 470X470 510X480
EJECTOR  TONNAGE KN 25 35 35 60 60 60
EJECTOR  STROKE mm 80 110 130 150 150 150
EJECTOR  NUMBER PC 1 5 5 5 5 5
OTHERS
MAX.PUMP  PRESSURE  Mpa 16 16 16 16 16 16
HEATER  POWER KW 4.5 7.1 10.1 13.6 13.6 14
PUMP MOTOR  POWER KW 11 11 13 18.5 18.5 18.5
OIL  TANK CUBAGE L 180 220 250 270 270 300
MACHINE  DIMENSION(LxWxH) M 3.7X1.1X1.6 4.2X1.2X1.9 4.5X1.2X1.9 4.9X1.25X1.95 5.2X1.3X2 5.35X1.35X2
MACHINE  WEIGHT
T 2.5 3 3.5 4.5 5.2 5.8

 

SPECIFICATION
MZ220MD MZ250MD MZ280MD MZ320MD MZ400MD MZ500MD
ITEM A B C A B C A B C A B C D A B C D A B C D
INJECTION  UNIT
DIAMETER mm 45 50 55 50 55 60 55 60 65 60 65 70 75 65 70 75 80 75 80 85 90
RATIO L/D 24.4 22 20 24.2 22 20.2 23.8 21.8 20.2 23.8 22 20.4 19.1 23.7 22 20.5 19.3 23.5 22 20.7 19.6
VOLUME(THEORETICAL) 421 520 630 530 641 763 653 778 913 792 929 1078 1237 1261 1462 1679 1910 1811 2061 2327 2608
INJECTION  WEIGHT(PS) g 388 479 579 488 590 702 601 715 840 728 855 991 1138 1160 1345 1544 1757 1666 1896 2140 2400
INJECTION  PRESSURE Mpa 210 170 140 215 177 149 202 170 144 198 169 145 127 194 168 146 128 191 168 148 132
INJECTION  RATE g/sec 134 166 201 175 211 252 186 221 259 247 290 337 387 252 292 335 382 360 410 463 519
SCREW  SPEED rpm 200 200 200 230 165 175
CLAMPING UNIT
CLAMP  TONNAGE KN 2200 2500 2800 3200 4000 5000
TOGGLE  STROKE mm 500 540 560 640 700 780
MIN.MOLD  HEIGHT mm 180 200 200 250 280 300
HEIGHT mm 540 580 630 680 780 820
TIE  BARS mm 530X500 580X580 610X560 680X620 750X710 830X780
EJECTOR  TONNAGE KN 70 70 70 70 100 120
EJECTOR  STROKE mm 160 170 185 185 200 230
EJECTOR  NUMBER PC 9 13 13 13 13 13
OTHERS
MAX.PUMP  PRESSURE  Mpa 16 16 16 16 16 16
HEATER  POWER KW 14.5 16 17 18.5 23.5 32
POWER KW 18.5 20 20 33 33 33+13
OIL  TANK CUBAGE L 320 340 360 550 630 700
MACHINE  DIMENSION(LxWxH) M 5.7X1.47x2.2 5.9X1.51X2.2 6.1X1.55X2.2 6.9X1.6X2.3 7.5X1.65X2.35 8.15X1.95X2.5
MACHINE  WEIGHT
T 6.5 8 9 10.5 13.2 17.5

 

SPECIFICATION
MZ600MD MZ700MD MZ800MD MZ900MD MZ1050MD
ITEM A B C D A B C D A B C D A B C D A B C D
INJECTION  UNIT
SCREW  DIAMETER mm 80 85 90 95 85 90 100 110 85 95 105 115 90 100 110 120 100 110 120 130
SCREW  L/D  RATIO L/D 23.4 22 20.8 19.7 23.3 22 19.8 18 24.6 22 19.9 18.2 24.4 22 20 18.3 24.2 22 20.2 18.6
VOLUME(THEORETICAL) 2287 2582 2895 3225 2667 2990 3691 4467 2781 3473 4243 5090 3117 3848 4657 5542 4163 5037 5994 7035
INJECTION  WEIGHT(PS) g 2104 2375 2663 2967 2454 2751 3396 4109 2558 3195 3903 4682 2868 3541 4284 5098 3830 4634 5515 6472
INJECTION  PRESSURE Mpa 188 167 148 133 198 177 143 118 255 204 167 139 227 184 152 128 219 181 152 129
INJECTION  RATE g/sec 410 463 519 578 437 490 605 732 462 578 705 846 518 640 774 921 620 750 892 1047
SCREW  SPEED rpm 180 140 150 150 110
CLAMPING UNIT
CLAMP  TONNAGE KN 6000 7000 8000 9000 10500
TOGGLE  STROKE mm 860 970 1040 1100 1200
MIN.MOLD  HEIGHT mm 350 400 420 430 440
MAX.MOLD  HEIGHT mm 900 950 1020 1100 1150
BETWEEN  TIE  BARS mm 880X830 960X960 1020X1020 1060X1060 1160X1160
EJECTOR  TONNAGE KN 150 170 200 200 240
STROKE mm 260 280 300 320 340
EJECTOR  NUMBER PC 17 17 21 21 21
OTHERS
MAX.PUMP  PRESSURE  Mpa 16 16 16 16 16
HEATER  POWER KW 43 47 50 52 65
PUMP MOTOR  POWER KW 33+18.5 33+20 33+33+13 33+33+13 33+33+20
OIL  TANK CUBAGE L 900 1200 1500 1500 2000
MACHINE  DIMENSION(LxWxH) M 9.3X2.2X2.71 9.8X2.4X2.7 10.7X2.48X2.82 11.5X2.56X2.82 12X2.58X3.7
MACHINE  WEIGHT
T 24 31 40 49 55

 

SPECIFICATION
MZ1200MD MZ1400MD MZ1700MD MZ2000MD MZ2200MD
ITEM A B C D A B C D A B C D A B C D A B C D
INJECTION  UNIT
SCREW  DIAMETER mm 110 120 130 140 120 130 140 150 130 140 150 160 135 145 155 165 140 150 160 170
SCREW  L/D  RATIO L/D 24.2 22.2 20.5 19 23.8 22 20.4 19.1 24.1 22.4 20.9 19.6 24.1 22.4 21 19.7 24 22.4 21 19.8
SHOT  VOLUME(THEORETICAL) 5037 5994 7035 8159 6786 7964 9236 10603 10287 11930 13695 15582 11093 12798 14624 16571 12315 14137 16085 18158
INJECTION  WEIGHT(PS) g 4634 5515 6472 7506 6243 7327 8497 9755 9464 10976 12600 14336 10206 11774 13454 15246 11330 13006 14798 16706
INJECTION  PRESSURE Mpa 181 152 129 111 184 156 135 117 183 158 137 121 170 147 129 113 182 159 140 124
INJECTION  RATE g/sec 750 892 1047 1214 800 939 1089 1251 1070 1241 1425 1621 1154 1331 1521 1724 1342 1541 1753 1979
SCREW  SPEED rpm 110 95 100 100 90
  CLAMPING UNIT
CLAMP  TONNAGE KN 12000 14000 17000 20000 22000
TOGGLE  STROKE mm 1250 1350 1600 1700 1850
MIN.MOLD  HEIGHT mm 450 600 700 750 800
MAX.MOLD  HEIGHT mm 1200 1400 1600 1700 1800
SPACE  BETWEEN  TIE  BARS mm 1220X1220 1350X1350 1570X1470 1660X1520 1750X1600
EJECTOR  TONNAGE KN 240 280 320 430 430
EJECTOR  STROKE mm 350 400 420 420 450
EJECTOR  NUMBER PC 21 29 33 33 29
OTHERS
MAX.PUMP  PRESSURE  Mpa 16 16 16 16 16
HEATER  POWER KW 71.35 84 93 103 114
PUMP MOTOR  POWER KW 33+33+20 33+33+33 33+33+33+33 33+33+33+33 33+33+33+33+33
OIL  TANK CUBAGE L 2000 2300 2800 2800 3300
MACHINE  DIMENSION(LxWxH) M 12.3X2.6X3.7 15X2.75X4.2 16.7X3.1X5.14 17.5X3.5X5.14 18.3X3.7X5.4
MACHINE  WEIGHT
T 60 85 110 130 145

for professional brewey solution and exactly quotation,please feel free to send inquiry below.