• HIGH ENERGY SAVING

      MZ-D energy-saving injection molding machines consume no extra energy due to output volume changes according to load alteration. In the phase of holding pressure, servo motor lowers rotate speed and consumes a little of energies. In the phase of cooling, motor doesn’t work and consumes no energy. According to different products, MZ-D energy-saving injection machines will save up to 80% energy and bring you prominent economic benefit.

       
    • BETTER MOLDING STABILITY

      MZ-D energy-saving injection molding machines are equipped with rotary encoder and pressure sensor, and both of them have feedback of flow and pressure. Through changing the speed and torque, high quality synchronous servo motor makes corresponding flow and pressure adjustments to reach the effects of close-loop precision control.

       
    • QUICK RESPONSE

      It only costs 0.05s for MZ-D energy-saving injection molding machines to achieve the maximum output. In comparison with conventional hydraulic injection molding machines, their response speed have been obviously quickened and cycle time effectively shortened to improve production efficiency.

       
SPECIFICATION
MZ80D MZ100D MZ130D MZ160D MZ170D
ITEM A B C A B C A B C A B C A B C
INJECTION  UNIT
SCREW  DIAMETER mm 30 35 40 30 35 40 36 40 45 40 45 50 40 45 50
SCREW  L/D  RATIO L/D 22 18.9 16.5 25.7 22 19.3 24.4 22 19.6 24.8 22 19.8 24.8 22 19.8
SHOT  VOLUME(THEORETICAL) 88 120 157 106 144 188 206 254 321 276 350 432 276 350 432
INJECTION  WEIGHT(PS) g 81 111 145 98 133 173 189 234 296 254 322 397 254 322 397
INJECTION  PRESSURE Mpa 200 146 112 264 194 148 248 201 159 238 188 152 238 188 152
INJECTION  RATE g/sec 81 110 143 61 83 109 79 98 124 119 150 185 119 150 185
SCREW  SPEED rpm 290 235 245 240 240
CLAMPING UNIT
CLAMP  TONNAGE KN 800 1000 1300 1600 1700
TOGGLE  STROKE mm 270 340 365 430 430
MIN.MOLD  HEIGHT mm 120 150 150 150 150
MAX.MOLD  HEIGHT mm 350 400 450 520 520
SPACE  BETWEEN  TIE  BARS mm 320X310 370X350 420X385 465X430 470X470
EJECTOR  TONNAGE KN 25 35 35 60 60
EJECTOR  STROKE mm 80 110 130 150 150
EJECTOR  NUMBER PC 1 5 5 5 5
OTHERS
MAX.PUMP  PRESSURE  Mpa 16 16 16 16 16
HEATER  POWER KW 4.5 7.1 10.1 13.6 13.6
PUMP MOTOR  POWER KW 11 11 13 18.5 18.5
OIL  TANK CUBAGE L 180 220 250 270 270
MACHINE  DIMENSION(LxWxH) M 3.7X1.1X1.6 4.2X1.2X1.9 4.5X1.2X1.9 4.9X1.25X1.95 5.2X1.3X2
MACHINE  WEIGHT
T 2.5 3 3.5 4.5 5.2

<

SPECIFICATION
MZ200D MZ220D MZ280D MZ320D MZ400D MZ500D
ITEM A B C A B C A B C A B C D A B C D A B C D
INJECTION  UNIT
SCREW  DIAMETER mm 42 47 52 45 50 55 55 60 65 60 65 70 75 65 70 75 80 75 80 85 90
SCREW  L/D  RATIO L/D 24.6 22 19.9 24.4 22 20 23.8 21.8 20.2 23.8 22 20.4 19.1 23.7 22 20.5 19.3 23.5 22 20.7 19.6
SHOT  VOLUME(THEORETICAL) 333 416 510 421 520 630 653 778 913 792 929 1078 1237 1261 1462 1679 1910 1811 2061 2327 2608
INJECTION  WEIGHT(PS) g 306 383 469 388 479 579 601 715 840 728 855 991 1138 1160 1345 1544 1757 1666 1896 2140 2400
INJECTION  PRESSURE Mpa 215 172 140 210 170 140 202 170 144 198 169 145 127 194 168 146 128 191 168 148 132
INJECTION  RATE g/sec 131 164 201 134 166 201 186 221 259 247 290 337 387 252 292 335 382 360 410 463 519
SCREW  SPEED rpm 240 200 200 230 165 175
CLAMPING UNIT
CLAMP  TONNAGE KN 2000 2200 2800 3200 4000 5000
TOGGLE  STROKE mm 470 500 560 640 700 780
MIN.MOLD  HEIGHT mm 180 180 200 250 280 300
MAX.MOLD  HEIGHT mm 530 540 630 680 780 820
SPACE  BETWEEN  TIE  BARS mm 510X480 530X500 610X560 680X620 750X710 830X780
EJECTOR  TONNAGE KN 60 70 70 70 100 120
EJECTOR  STROKE mm 150 160 185 185 200 230
EJECTOR  NUMBER PC 5 9 13 13 13 13
OTHERS
MAX.PUMP  PRESSURE  Mpa 16 16 16 16 16 16
HEATER  POWER KW 14 14.5 17 18.5 23.5 32
PUMP MOTOR  POWER KW 18.5 18.5 20 33 33 33+13
OIL  TANK CUBAGE L 300 320 360 550 630 700
MACHINE  DIMENSION(LxWxH) M 5.35X1.35X2 5.7X1.47x2.2 6.1X1.55X2.2 6.9X1.6X2.3 7.5X1.65X2.35 8.15X1.95X2.5
MACHINE  WEIGHT
T 5.8 6.5 9 10.5 13.2 17.5

 

SPECIFICATION
MZ600D MZ700D MZ900D MZ1200D MZ1400D MZ1700D
ITEM A B C D A B C D A B C D A B C D A B C D A B C D
INJECTION  UNIT
SCREW  DIAMETER mm 80 85 90 95 85 90 100 110 90 100 110 120 110 120 130 140 120 130 140 150 130 140 150 160
SCREW  L/D  RATIO L/D 23.4 22 20.8 19.7 23.3 22 19.8 18 24.4 22 20 18.3 24.2 22.2 20.5 19 23.8 22 20.4 19.1 24.1 22.4 20.9 19.6
SHOT  VOLUME(THEORETICAL) 2287 2582 2895 3225 2667 2990 3691 4467 3117 3848 4657 5542 5037 5994 7035 8159 6786 7964 9236 10603 10287 11930 13695 15582
INJECTION  WEIGHT(PS) g 2104 2375 2663 2967 2454 2751 3396 4109 2868 3541 4284 5098 4634 5515 6472 7506 6243 7327 8497 9755 9464 10976 12600 14336
INJECTION  PRESSURE Mpa 188 167 148 133 198 177 143 118 227 184 152 128 181 152 129 111 184 156 135 117 183 158 137 121
INJECTION  RATE g/sec 410 463 519 578 437 490 605 732 518 640 774 921 750 892 1047 1214 800 939 1089 1251 1070 1241 1425 1621
SCREW  SPEED rpm 180 140 150 110 95 100
CLAMPING UNIT
CLAMP  TONNAGE KN 6000 7000 9000 12000 14000 17000
TOGGLE  STROKE mm 860 970 1100 1250 1350 1600
MIN.MOLD  HEIGHT mm 350 400 430 450 600 700
MAX.MOLD  HEIGHT mm 900 950 1100 1200 1400 1600
SPACE  BETWEEN  TIE  BARS mm 880X830 960X960 1060X1060 1220X1220 1350X1350 1570X1470
EJECTOR  TONNAGE KN 150 170 200 240 280 320
EJECTOR  STROKE mm 260 280 320 350 400 420
EJECTOR  NUMBER PC 17 17 21 21 29 33
OTHERS
MAX.PUMP  PRESSURE  Mpa 16 16 16 16 16 16
HEATER  POWER KW 43 47 52 71.35 84 93
PUMP MOTOR  POWER KW 33+18.5 33+20 33+33+13 33+33+20 33+33+33 33+33+33+33
OIL  TANK CUBAGE L 900 1200 1500 2000 2300 2800
MACHINE  DIMENSION(LxWxH) M 9.3X2.2X2.71 9.8X2.4X2.7 11.5X2.56X2.82 12.3X2.6X3.7 15X2.75X4.2 16.7X3.1X5.14
MACHINE  WEIGHT
T 24 31 49 60 85 110

for professional brewey solution and exactly quotation,please feel free to send inquiry below.